Skip to content

GitLab 15 changes

DETAILS: Tier: Free, Premium, Ultimate Offering: Self-managed

This page contains upgrade information for minor and patch versions of GitLab 15. Ensure you review these instructions for:

  • Your installation type.
  • All versions between your current version and your target version.

For more information about upgrading GitLab Helm Chart, see the release notes for 6.0.

15.11.1

  • Many project importers and group importers now require the Maintainer role instead of only requiring the Developer role. For more information, see the documentation for any importers you use.

15.11.0

  • Upgrade to patch release 15.11.3 or later. This avoids issue 408304 when upgrading from 15.5.0 and earlier.

  • Normally, backups in environments that have PgBouncer must bypass PgBouncer by setting variables that are prefixed with GITLAB_BACKUP_. However, due to an issue, gitlab-backup uses the regular database connection through PgBouncer instead of the direct connection defined in the override, and the database backup fails. The workaround is to use pg_dump directly.

    Affected releases:

    Affected minor releases Affected patch releases Fixed in
    15.11 All None
    16.0 All None
    16.1 All None
    16.2 All None
    16.3 All None
    16.4 All None
    16.5 All None
    16.6 All None
    16.7 16.7.0 - 16.7.6 16.7.7
    16.8 16.8.0 - 16.8.3 16.8.4

Linux package installations

In GitLab 15.11, PostgreSQL will automatically be upgraded to 13.x except for the following cases:

  • You are running the database in high availability using Patroni.
  • Your database nodes are part of a GitLab Geo configuration.
  • You have specifically opted out from automatically upgrading PostgreSQL.
  • You have postgresql['version'] = 12 in your /etc/gitlab/gitlab.rb.

Fault-tolerant and Geo installations support manual upgrades to PostgreSQL 13, see Packaged PostgreSQL deployed in an HA/Geo Cluster.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

pg_upgrade fails to upgrade the bundled PostregSQL database to version 13

Affected minor releases Affected patch releases Fixed in
15.2 - 15.10 All None
15.11 15.11.0 - 15.11.11 15.11.12 and later

A bug in the built-in pg-upgrade tool prevents upgrading the bundled PostgreSQL database to version 13. This leaves the secondary site in a broken state, and prevents upgrading the Geo installation to GitLab 16.x (PostgreSQL 12 support has removed in 16.0 and later releases). This occurs on secondary sites using the bundled PostgreSQL software, running both the secondary main Rails database and tracking database on the same node. There is a manual workaround if you can't upgrade to 15.11.12 and later.

15.11.x

  • A bug can cause new LDAP users signing in for the first time to be assigned a username based on their email address instead of their LDAP username attribute. A manual workaround is to set gitlab_rails['omniauth_auto_link_ldap_user'] = true, or upgrade to GitLab 16.1 or later where the bug has been fixed.

15.10.5

  • A bug with Elastic Indexer Cron Workers can cause saturation in Sidekiq.
    • When this issue occurs, merge request merges, pipelines, Slack notifications, and other events are not created or take a long time to occur.
    • This issue may not manifest immediately as it can take up to a week before the Sidekiq is saturated enough.
    • Elasticsearch does not need to be enabled for this to occur.
    • To resolve this issue, upgrade to 15.11 or use the workaround in the issue.
  • Many project importers and group importers now require the Maintainer role instead of only requiring the Developer role. For more information, see the documentation for any importers you use.

15.10.0

  • A bug with Elastic Indexer Cron Workers can cause saturation in Sidekiq.

    • When this issue occurs, merge request merges, pipelines, Slack notifications, and other events are not created or take a long time to occur.
    • This issue may not manifest immediately as it can take up to a week before the Sidekiq is saturated enough.
    • Elasticsearch does not need to be enabled for this to occur.
    • To resolve this issue, upgrade to 15.11 or use the workaround in the issue.
  • A bug with zero-downtime reindexing can cause a Couldn't load task status error when you reindex. You might also get a sliceId must be greater than 0 but was [-1] error on the Elasticsearch host. As a workaround, consider reindexing from scratch or upgrading to GitLab 16.3.

  • Gitaly configuration changes significantly in Omnibus GitLab 16.0. You can begin migrating to the new structure in Omnibus GitLab 15.10 while backwards compatibility is maintained in the lead up to Omnibus GitLab 16.0. Read more about this change.

  • You might encounter the following error while upgrading to GitLab 15.10 or later:

    STDOUT: rake aborted!
    StandardError: An error has occurred, all later migrations canceled:
    PG::CheckViolation: ERROR:  check constraint "check_70f294ef54" is violated by some row

    This error is caused by a batched background migration introduced in GitLab 15.8 not being finalized before GitLab 15.10. To resolve this error:

    1. Execute the following SQL statement using the database console (sudo gitlab-psql for Linux package installs):

      UPDATE oauth_access_tokens SET expires_in = '7200' WHERE expires_in IS NULL;
    2. Re-run database migrations.

  • You might also encounter the following error while upgrading to GitLab 15.10 or later:

    "exception.class": "ActiveRecord::StatementInvalid",
    "exception.message": "PG::SyntaxError: ERROR:  zero-length delimited identifier at or near \"\"\"\"\nLINE 1: ...COALESCE(\"lock_version\", 0) + 1 WHERE \"ci_builds\".\"\" IN (SEL...\n

    This error is caused by a batched background migration introduced in GitLab 14.9 not being finalized before upgrading to GitLab 15.10 or later. To resolve this error, it is safe to mark the migration as complete:

    # Start the rails console
    
    connection = Ci::ApplicationRecord.connection
    
    Gitlab::Database::SharedModel.using_connection(connection) do
      migration = Gitlab::Database::BackgroundMigration::BatchedMigration.find_for_configuration(
        Gitlab::Database.gitlab_schemas_for_connection(connection), 'NullifyOrphanRunnerIdOnCiBuilds', :ci_builds, :id, [])
    
      # mark all jobs completed
      migration.batched_jobs.update_all(status: Gitlab::Database::BackgroundMigration::BatchedJob.state_machine.states[:succeeded].value)
      migration.update_attribute(:status, Gitlab::Database::BackgroundMigration::BatchedMigration.state_machine.states[:finished].value)
    end

    For more information, see issue 415724.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.9.0

  • A bug with Elastic Indexer Cron Workers can cause saturation in Sidekiq.

    • When this issue occurs, merge request merges, pipelines, Slack notifications, and other events are not created or take a long time to occur.
    • This issue may not manifest immediately as it can take up to a week before the Sidekiq is saturated enough.
    • Elasticsearch does not need to be enabled for this to occur.
    • To resolve this issue, upgrade to 15.11 or use the workaround in the issue.
  • A bug with the BackfillTraversalIdsToBlobsAndWikiBlobs advanced search migration might cause the Elasticsearch cluster to become saturated.

    • When this issue occurs, searches might become slow and updates to the Elasticsearch cluster might take a long time to complete.
    • To resolve this issue, upgrade to GitLab 15.10 to reduce the migration batch size.
  • Upgrade to patch release 15.9.3 or later. This provides fixes for two database migration bugs:

    • Patch releases 15.9.0, 15.9.1, 15.9.2 have a bug that can cause data loss from the user profile fields linkedin, twitter, skype, website_url, location, and organization. For more information, see issue 393216.
    • The second bug fix ensures it is possible to upgrade directly from 15.4.x.
  • As part of the CI Partitioning effort, a new Foreign Key was added to ci_builds_needs. On GitLab instances with large CI tables, adding this constraint can take longer than usual.

  • Praefect's metadata verifier's invalid metadata deletion behavior is now enabled by default.

    The metadata verifier processes replica records in the Praefect database and verifies the replicas actually exist on the Gitaly nodes. If the replica doesn't exist, its metadata record is deleted. This enables Praefect to fix situations where a replica has a metadata record indicating it's fine but, in reality, it doesn't exist on disk. After the metadata record is deleted, Praefect's reconciler schedules a replication job to recreate the replica.

    Because of past issues with the state management logic, there may be invalid metadata records in the database. These could exist, for example, because of incomplete deletions of repositories or partially completed renames. The verifier deletes these stale replica records of affected repositories. These repositories may show up as unavailable repositories in the metrics and praefect dataloss sub-command because of the replica records being removed. If you encounter such repositories, remove the repository using praefect remove-repository to remove the repository's remaining records.

    You can find repositories with invalid metadata records prior in GitLab 15.0 and later by searching for the log records outputted by the verifier. Read more about repository verification, and to see an example log entry.

  • Praefect configuration changes significantly in Omnibus GitLab 16.0. You can begin migrating to the new structure in Omnibus GitLab 15.9 while backwards compatibility is maintained in the lead up to Omnibus GitLab 16.0. Read more about this change.

Self-compiled installations

  • For self-compiled (source) installations, with the addition of gitlab-sshd the Kerberos headers are needed to build GitLab Shell.

    sudo apt install libkrb5-dev

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.8.2

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.8.1

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.8.0

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • pg_upgrade fails to upgrade the bundled PostregSQL database to version 13. See the details and workaround.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Cloning LFS objects from secondary site downloads from the primary site even when secondary is fully synced. See the details and workaround.

15.7.6

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.5

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.4

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.3

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.2

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the upgrades. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.1

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.7.0

  • This version validates a NOT NULL DB constraint on the issues.work_item_type_id column. To upgrade to this version, no records with a NULL work_item_type_id should exist on the issues table. There are multiple BackfillWorkItemTypeIdForIssues background migrations that will be finalized with the EnsureWorkItemTypeBackfillMigrationFinished post-deploy migration.

  • GitLab 15.4.0 introduced a batched background migration to backfill namespace_id values on issues table. This migration might take multiple hours or days to complete on larger GitLab instances. Make sure the migration has completed successfully before upgrading to 15.7.0.

  • A database constraint is added, specifying that the namespace_id column on the issues table has no NULL values.

    • If the namespace_id batched background migration from 15.4 failed (see above) then the 15.7 upgrade fails with a database migration error.

    • On GitLab instances with large issues tables, validating this constraint causes the upgrade to take longer than usual. All database changes need to complete within a one-hour limit:

      FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails]
      [..]
      Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s:

      A workaround exists to complete the data change and the upgrade manually.

  • The default Sidekiq max_concurrency has been changed to 20. This is now consistent in our documentation and product defaults.

    For example, previously:

    • Linux package installation default (sidekiq['max_concurrency']): 50
    • Self-compiled installation default: 50
    • Helm chart default (gitlab.sidekiq.concurrency): 25

    Reference architectures still use a default of 10 as this is set specifically for those configurations.

    Sites that have configured max_concurrency will not be affected by this change. Read more about the Sidekiq concurrency setting.

  • GitLab Runner 15.7.0 introduced a breaking change that affects CI/CD jobs: Correctly handle expansion of job file variables. Previously, job-defined variables that referred to file type variables were expanded to the value of the file variable (its content). This behavior did not respect the typical rules of shell variable expansion. There was also the potential that secrets or sensitive information could leak if the file variable and its contents printed. For example, if they were printed in an echo output. For more information, see Understanding the file type variable expansion change in GitLab 15.7.

  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

  • Cloning LFS objects from secondary site downloads from the primary site even when secondary is fully synced. See the details and workaround.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • pg_upgrade fails to upgrade the bundled PostregSQL database to version 13. See the details and workaround.
  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.6.7

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.6.6

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.

15.6.5

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.6.4

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6, and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.6.3

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.6.2

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.6.1

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.6.0

  • You should use one of the officially supported PostgreSQL versions. Some database migrations can cause stability and performance issues with older PostgreSQL versions.

  • Git 2.37.0 and later is required by Gitaly. For self-compiled installations, you should use the Git version provided by Gitaly.

  • A database change to modify the behavior of four indexes fails on instances where these indexes do not exist:

    Caused by:
    PG::UndefinedTable: ERROR:  relation "index_issues_on_title_trigram" does not exist

    The other three indexes are: index_merge_requests_on_title_trigram, index_merge_requests_on_description_trigram, and index_issues_on_description_trigram.

    This issue was fixed in GitLab 15.7 and backported to GitLab 15.6.2. The issue can also be worked around: read about how to create these indexes.

Linux package installations

In GitLab 15.6, the PostgreSQL versions shipped with omnibus-gitlab packages have been upgraded to 12.12 and 13.8. Unless explicitly opted out, this can cause an automatic restart of the PostgreSQL service, and can potentially cause downtime.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • pg_upgrade fails to upgrade the bundled PostregSQL database to version 13. See the details and workaround.
  • Container registry push events are rejected by the /api/v4/container_registry_event/events endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This affects versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover.
  • We discovered an issue where replication and verification of projects and wikis was not keeping up on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover.
    • Affected versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2.
    • Versions containing fix: GitLab 15.8.3 and later.
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.
  • Cloning LFS objects from secondary site downloads from the primary site even when secondary is fully synced. See the details and workaround.

15.5.5

15.5.4

15.5.3

  • GitLab 15.4.0 introduced a default Sidekiq routing rule that routes all jobs to the default queue. For instances using queue selectors, this causes performance problems as some Sidekiq processes will be idle.

    • The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior.

    • If a GitLab instance now listens only to the default queue (which is not currently recommended), it will be required to add this routing rule back in /etc/gitlab/gitlab.rb:

      sidekiq['routing_rules'] = [['*', 'default']]
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.5.2

  • GitLab 15.4.0 introduced a default Sidekiq routing rule that routes all jobs to the default queue. For instances using queue selectors, this causes performance problems as some Sidekiq processes will be idle.

    • The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior.

    • If a GitLab instance now listens only to the default queue (which is not currently recommended), it will be required to add this routing rule back in /etc/gitlab/gitlab.rb:

      sidekiq['routing_rules'] = [['*', 'default']]
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.5.1

  • GitLab 15.4.0 introduced a default Sidekiq routing rule that routes all jobs to the default queue. For instances using queue selectors, this causes performance problems as some Sidekiq processes will be idle.

    • The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior.

    • If a GitLab instance now listens only to the default queue (which is not currently recommended), it will be required to add this routing rule back in /etc/gitlab/gitlab.rb:

      sidekiq['routing_rules'] = [['*', 'default']]
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.5.0

  • GitLab 15.4.0 introduced a default Sidekiq routing rule that routes all jobs to the default queue. For instances using queue selectors, this causes performance problems as some Sidekiq processes will be idle.

    • The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior.

    • If a GitLab instance now listens only to the default queue (which is not currently recommended), it will be required to add this routing rule back in /etc/gitlab/gitlab.rb:

      sidekiq['routing_rules'] = [['*', 'default']]
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.4.6

15.4.5

15.4.4

15.4.3

15.4.2

  • A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:
    • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
    • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
      • 15.2.5 --> 15.3.5
      • 15.3.0 - 15.3.4 --> 15.3.5
      • 15.4.1 --> 15.4.3
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.4.1

  • A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:
    • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
    • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
      • 15.2.5 --> 15.3.5
      • 15.3.0 - 15.3.4 --> 15.3.5
      • 15.4.1 --> 15.4.3
  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

15.4.0

  • GitLab 15.4.0 includes a batched background migration to remove incorrect values from expire_at in ci_job_artifacts table. This migration might take hours or days to complete on larger GitLab instances.

  • By default, Gitaly and Praefect nodes use the time server at pool.ntp.org. If your instance can not connect to pool.ntp.org, configure the NTP_HOST variable otherwise, there can be ntp: read udp ... i/o timeout errors in the logs and the output of gitlab-rake gitlab:gitaly:check. However, if the Gitaly hosts' times are in sync, these errors can be ignored.

  • GitLab 15.4.0 introduced a default Sidekiq routing rule that routes all jobs to the default queue. For instances using queue selectors, this causes performance problems as some Sidekiq processes will be idle.

    • The default routing rule has been reverted in 15.4.5, so upgrading to that version or later will return to the previous behavior.

    • If a GitLab instance now listens only to the default queue (which is not currently recommended), it will be required to add this routing rule back in /etc/gitlab/gitlab.rb:

      sidekiq['routing_rules'] = [['*', 'default']]
  • The structure of /etc/gitlab/gitlab-secrets.json was modified in GitLab 15.4, and new configuration was added to gitlab_pages, grafana, and mattermost sections. In a highly available or GitLab Geo environment, secrets need to be the same on all nodes. If you're manually syncing the secrets file across nodes, or manually specifying secrets in /etc/gitlab/gitlab.rb, make sure /etc/gitlab/gitlab-secrets.json is the same on all nodes.

  • GitLab 15.4.0 introduced a batched background migration to backfill namespace_id values on issues table. This migration might take multiple hours or days to complete on larger GitLab instances. Make sure the migration has completed successfully before upgrading to 15.7.0 or later.

  • Due to a bug introduced in GitLab 15.4, if one or more Git repositories in Gitaly Cluster is unavailable, then Repository checks and Geo replication and verification stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by reverting the change in GitLab 15.9.0. Before upgrading to this version, check if you have any "unavailable" repositories. See the bug issue for more information.

  • A redesigned sign-in page is enabled by default in GitLab 15.4 and later, with improvements shipping in later releases. For more information, see epic 8557. It can be disabled with a feature flag. Start a Rails console and run:

    Feature.disable(:restyle_login_page)

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.3.4

A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

  • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
  • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
    • 15.2.5 --> 15.3.5
    • 15.3.0 - 15.3.4 --> 15.3.5
    • 15.4.1 --> 15.4.3

15.3.3

  • In GitLab 15.3.3, SAML Group Links API access_level attribute type changed to integer. See the API documentation.

  • A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

    • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
    • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
      • 15.2.5 --> 15.3.5
      • 15.3.0 - 15.3.4 --> 15.3.5
      • 15.4.1 --> 15.4.3

15.3.2

A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

  • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
  • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
    • 15.2.5 --> 15.3.5
    • 15.3.0 - 15.3.4 --> 15.3.5
    • 15.4.1 --> 15.4.3

15.3.1

A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

  • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
  • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
    • 15.2.5 --> 15.3.5
    • 15.3.0 - 15.3.4 --> 15.3.5
    • 15.4.1 --> 15.4.3

15.3.0

  • New Git repositories created in Gitaly cluster no longer use the @hashed storage path. Server hooks for new repositories must be copied into a different location. Praefect now generates replica paths for use by Gitaly cluster. This change is a pre-requisite for Gitaly cluster atomically creating, deleting, and renaming Git repositories.

    To identify the replica path, query the Praefect repository metadata and pass the @hashed storage path to -relative-path.

    With this information, you can correctly install server hooks.

  • A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

    • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
    • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
      • 15.2.5 --> 15.3.5
      • 15.3.0 - 15.3.4 --> 15.3.5
      • 15.4.1 --> 15.4.3

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

LFS transfers redirect to primary from secondary site mid-session

Affected minor releases Affected patch releases Fixed in
15.1 All None
15.2 All None
15.3 15.3.0 - 15.3.2 15.3.3 and later

LFS transfers can redirect to the primary from secondary site mid-session causing failed pull and clone requests in GitLab 15.1.0 to 15.3.2 when Geo proxying is enabled. Geo proxying is enabled by default in GitLab 15.1 and later.

This issue is resolved in GitLab 15.3.3, so customers with the following configuration should upgrade to 15.3.3 or later:

  • LFS is enabled.
  • LFS objects are being replicated across Geo sites.
  • Repositories are being pulled by using a Geo secondary site.
  • Cloning LFS objects from secondary site downloads from the primary site even when secondary is fully synced. See the details and workaround.

Incorrect object storage LFS file deletion on secondary sites

Affected minor releases Affected patch releases Fixed in
15.0 All None
15.1 All None
15.2 All None
15.3 15.3.0 - 15.3.2 15.3.3 and later

Incorrect deletion of object storage files on Geo secondary sites can occur in GitLab 15.0.0 to 15.3.2 in the following situations:

  • GitLab-managed object storage replication is disabled, and LFS objects are created while importing a project with object storage enabled.
  • GitLab-managed replication to sync object storage is enabled and subsequently disabled.

This issue is resolved in 15.3.3. Customers who have both LFS enabled and LFS objects being replicated across Geo sites should upgrade directly to 15.3.3 to reduce the risk of data loss on secondary sites.

15.2.5

A license caching issue prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue:

  • Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly.
  • Upgrade to a version that is not affected by this issue. The following upgrade paths are available for affected versions:
    • 15.2.5 --> 15.3.5
    • 15.3.0 - 15.3.4 --> 15.3.5
    • 15.4.1 --> 15.4.3

15.2.0

  • GitLab installations that have multiple web nodes should be upgraded to 15.1 before upgrading to 15.2 (and later) due to a configuration change in Rails that can result in inconsistent ETag key generation.

  • Some Sidekiq workers were renamed in this release. To avoid any disruption, run the Rake tasks to migrate any pending jobs before starting the upgrade to GitLab 15.2.0.

  • Gitaly now executes its binaries in a runtime location. By default on Omnibus GitLab, this path is /var/opt/gitlab/gitaly/run/. If this location is mounted with noexec, merge requests generate the following error:

    fork/exec /var/opt/gitlab/gitaly/run/gitaly-<nnnn>/gitaly-git2go-v15: permission denied

    To resolve this, remove the noexec option from the file system mount. An alternative is to change the Gitaly runtime directory:

    1. Add gitaly['runtime_dir'] = '<PATH_WITH_EXEC_PERM>' to /etc/gitlab/gitlab.rb and specify a location without noexec set.
    2. Run sudo gitlab-ctl reconfigure.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.1.0

  • In GitLab 15.1.0, we are switching Rails ActiveSupport::Digest to use SHA256 instead of MD5. This affects ETag key generation for resources such as raw Snippet file downloads. To ensure consistent ETag key generation across multiple web nodes when upgrading, all servers must first be upgraded to 15.1.6 before upgrading to 15.2.0 or later:

    1. Ensure all GitLab web nodes are running GitLab 15.1.6.

    2. If you run GitLab on Kubernetes by using the cloud native GitLab Helm chart, make sure that all webservice pods are running GitLab 15.1.Z:

      kubectl get pods -l app=webservice -o custom-columns=webservice-image:{.spec.containers[0].image},workhorse-image:{.spec.containers[1].image}
    3. Enable the active_support_hash_digest_sha256 feature flag to switch ActiveSupport::Digest to use SHA256:

      1. Start the rails console

      2. Enable the feature flag:

        Feature.enable(:active_support_hash_digest_sha256)
    4. Only then, continue to upgrade to later versions of GitLab.

  • Unauthenticated requests to the ciConfig GraphQL field are no longer supported. Before you upgrade to GitLab 15.1, add an access token to your requests. The user creating the token must have permission to create pipelines in the project.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

15.0.0

  • Elasticsearch 6.8 is no longer supported. Before you upgrade to GitLab 15.0, update Elasticsearch to any 7.x version.

  • If you run GitLab with external PostgreSQL, particularly AWS RDS, ensure you upgrade PostgreSQL to patch levels to a minimum of 12.7 or 13.3 before upgrading to GitLab 14.8 or later.

    In 14.8 for GitLab Enterprise Edition and in 15.0 for GitLab Community Edition a GitLab feature called Loose Foreign Keys was enabled.

    After it was enabled, we have had reports of unplanned PostgreSQL restarts caused by a database engine bug that causes a segmentation fault.

    For more information, see issue 364763.

  • The use of encrypted S3 buckets with storage-specific configuration is no longer supported after removing support for using background_upload.

  • The certificate-based Kubernetes integration (DEPRECATED) is disabled by default, but you can be re-enable it through the certificate_based_clusters feature flag until GitLab 16.0.

  • When you use the GitLab Helm Chart project with a custom serviceAccount, ensure it has get and list permissions for the serviceAccount and secret resources.

  • The FF_GITLAB_REGISTRY_HELPER_IMAGE feature flag is removed and helper images are always pulled from GitLab Registry.

Linux package installations

  • The custom_hooks_dir setting for configuring global server hooks is now configured in Gitaly. The previous implementation in GitLab Shell was removed in GitLab 15.0. With this change, global server hooks are stored only inside a subdirectory named after the hook type. Global server hooks can no longer be a single hook file in the root of the custom hooks directory. For example, you must use <custom_hooks_dir>/<hook_name>.d/* rather than <custom_hooks_dir>/<hook_name>.

    • Use gitaly['custom_hooks_dir'] in gitlab.rb for Omnibus GitLab. This replaces gitlab_shell['custom_hooks_dir'].
  • PostgreSQL 13.6 is being shipped as the default version for fresh installs and 12.10 for upgrades. You can manually upgrade to PostgreSQL 13.6 following the upgrade docs with:

    sudo gitlab-ctl pg-upgrade -V 13

    Until PostgreSQL 12 is removed, you may pin the PostgreSQL version if needed for compatibility or test environment reasons.

    Fault tolerant and Geo installations require additional steps and planning.

    Because of underlying structural changes, the running PostgreSQL process must be restarted when it is upgraded before running database migrations. If automatic restart is skipped, you must run the following command before migrations are run:

    # If using PostgreSQL
    sudo gitlab-ctl restart postgresql
    
    # If using Patroni for Database replication
    sudo gitlab-ctl restart patroni

    If PostgreSQL is not restarted, you might face errors related to loading libraries.

  • Starting with GitLab 15.0, postgresql and geo-postgresql services are automatically restarted when the PostgreSQL version changes. Restarting PostgreSQL services causes downtime due to the temporary unavailability of the database for operations. While this restart is mandatory for proper functioning of the Database services, you might want more control over when the PostgreSQL is restarted. For that purpose, you can choose to skip the automatic restarts as part of gitlab-ctl reconfigure and manually restart the services.

    To skip automatic restarts as part of GitLab 15.0 upgrade, perform the following steps before the upgrade:

    1. Edit /etc/gitlab/gitlab.rb and add the following line:

      # For PostgreSQL/Patroni
      postgresql['auto_restart_on_version_change'] = false
      
      # For Geo PostgreSQL
      geo_postgresql['auto_restart_on_version_change'] = false
    2. Reconfigure GitLab:

      sudo gitlab-ctl reconfigure

    NOTE: It is mandatory to restart PostgreSQL when underlying version changes, to avoid errors like the one related to loading necessary libraries that can cause downtime. So, if you skip the automatic restarts using the above method, ensure that you restart the services manually before upgrading to GitLab 15.0.

  • Starting with GitLab 15.0, the AES256-GCM-SHA384 SSL cipher will not be allowed by NGINX by default. If you require this cipher (for example, if you use AWS's Classic Load Balancer), you can add the cipher back to the allow list by following the steps below:

    1. Edit /etc/gitlab/gitlab.rb and add the following line:

      nginx['ssl_ciphers'] = "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:AES256-GCM-SHA384"
    2. Reconfigure GitLab:

      sudo gitlab-ctl reconfigure
  • Support for Gitaly's internal socket path is removed. In GitLab 14.10, Gitaly introduced a new directory that holds all runtime data Gitaly requires to operate correctly. This new directory replaces the old internal socket directory, and consequentially the usage of gitaly['internal_socket_dir'] was deprecated in favor of gitaly['runtime_dir'].

    The old gitaly['internal_socket_dir'] configuration was removed in this release.

  • Background uploads settings for object storage are removed. Object storage now preferentially uses direct uploads.

    The following keys are no longer supported in /etc/gitlab/gitlab.rb:

    • gitlab_rails['artifacts_object_store_direct_upload']
    • gitlab_rails['artifacts_object_store_background_upload']
    • gitlab_rails['external_diffs_object_store_direct_upload']
    • gitlab_rails['external_diffs_object_store_background_upload']
    • gitlab_rails['lfs_object_store_direct_upload']
    • gitlab_rails['lfs_object_store_background_upload']
    • gitlab_rails['uploads_object_store_direct_upload']
    • gitlab_rails['uploads_object_store_background_upload']
    • gitlab_rails['packages_object_store_direct_upload']
    • gitlab_rails['packages_object_store_background_upload']
    • gitlab_rails['dependency_proxy_object_store_direct_upload']
    • gitlab_rails['dependency_proxy_object_store_background_upload']

Self-compiled installations

  • Support for more than one database has been added to GitLab. For self-compiled (source) installations, config/database.yml must include a database name in the database configuration. The main: database must be first. If an invalid or deprecated syntax is used, an error is generated during application start:

    ERROR: This installation of GitLab uses unsupported 'config/database.yml'.
    The main: database needs to be defined as a first configuration item instead of primary. (RuntimeError)

    Previously, the config/database.yml file looked like the following:

    production:
      adapter: postgresql
      encoding: unicode
      database: gitlabhq_production
      ...

    Starting with GitLab 15.0, it must define a main database first:

    production:
      main:
        adapter: postgresql
        encoding: unicode
        database: gitlabhq_production
        ...

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed